跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
The battery door has been removed for clarity, but is not necessary. See this guide for how to remove it. Unscrew the eight Phillips #00 screws on the back panel: Two 2.5x6mm screws above the screen.
  • The battery door has been removed for clarity, but is not necessary. See this guide for how to remove it.

  • Unscrew the eight Phillips #00 screws on the back panel:

  • Two 2.5x6mm screws above the screen.

  • One 3x6mm screw on the upper part of each side (two total; right side shown).

  • One 3x7.5mm screw on the lower part of each side (two total).

  • Two 3x4.5mm screws on the bottom.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可