跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Sometimes removing the connector from its socket isn’t enough; an additional step or two is required to free up the cable. Here we have a Lightning port ribbon cable that is lightly glued into place. To remove it, carefully slide a spudger or guitar pick underneath the cable, freeing it from the adhesive.
Glued-Down Cables
  • Sometimes removing the connector from its socket isn’t enough; an additional step or two is required to free up the cable. Here we have a Lightning port ribbon cable that is lightly glued into place.

  • To remove it, carefully slide a spudger or guitar pick underneath the cable, freeing it from the adhesive.

  • For particularly delicate or stubborn cables, a little heat from a heat gun, hair dryer, or our handy iOpener will help soften the adhesive.

有时从插座中拔下连接器是不够的; 需要额外的一两步来松开电缆。 这里我们有一个Lightning端口带状电缆,轻轻地粘在一起。

要清除它,请小心地将电缆下方使用撬棒或吉他拨片滑动,然后将其从粘合剂中取出。

对于特别细致或固定的电缆,来自热风枪,吹风机或我们方便的iOpener的一点热量将有助于软化粘合剂。

在开源创作共享许可协议下,你的投稿已被许可