跳转到主内容
英语
中文

正翻译步骤 9

步骤 9
Power cable connectors like this one have a small tab on the side that locks them in place. To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.
Power Cable Connectors
  • Power cable connectors like this one have a small tab on the side that locks them in place.

  • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

  • JST connectors are similar but don't have the locking tab. There are a few other similar types, with or without the tab, and having 2 or 3, sometimes up to half a dozen or more wires. These may be found connecting a microphone or speaker in a camera, or interconnecting the circuit boards in a radio.

  • Some variants are very small. If you try to disconnect them by pulling on the wires they may break. Ideally, pull on the body of the plug with a pair of tweezers, rocking it from side to side to ease it if necessary.

电源线连接器就像这一个有一个小的卡舌将其锁定到位。

要将连接器与插座分开,请按住卡舌,然后从连接器径直从插座上向上拔。

JST连接器和它样式相近但是没有锁定卡舌。还有一些其他样式也差不多,可能有或没有卡舌,可能有二到三个卡舌,还可能有半打甚至更多的线缆。通常这些可以在相机中的麦克风或扬声器、收音机中的电路板上找到。

有些变种样式的插头非常小。如果您尝试通过拉扯线缆的方式来断开其连接,有可能会造成损坏。如果必要的话,最好使用一对镊子晃动插头来使其松弛。

在开源创作共享许可协议下,你的投稿已被许可