跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的28本指南

英语
中文

正翻译步骤 4

步骤 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

取下固定电池排线到逻辑板的2.3 mm Phillips #000 螺丝

为了降低短路的风险,您可以使用电池隔离撬片来断开电池与逻辑板的连接。

将电池隔离撬片插入电池连接部位的下方,并将其放在此位置。

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.

在开源创作共享许可协议下,你的投稿已被许可