跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 4

步骤 4
Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter. Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables. Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.
  • Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.

  • Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.

使用塑料打开工具从底部边缘位置开始环绕一周来撬开底壳。

两条排线将壳子与电路板相连。 小心不要用力拉动壳子和排线。

[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* red] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.

在开源创作共享许可协议下,你的投稿已被许可