跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Loosen the two 4.2 mm-length screws located at the top of the back cover. The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws; it is not necessary to remove the washers for this repair guide.
  • Loosen the two 4.2 mm-length screws located at the top of the back cover.

  • The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws; it is not necessary to remove the washers for this repair guide.

拧下后壳顶部上的两颗4.2mm螺丝。

这些螺丝有锁紧垫圈。可以防止螺丝从后壳上脱落。 本指南中不需要拆下这些垫圈。

[* red] UnscrewLoosen the two 4.2 mmmm-length screws that are located at the top of the back cover.
[* black

[* icon_note
] The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws,screws; it is not necessary to remove the washers for this repair guide.
[* red] UnscrewLoosen the two 4.2 mmmm-length screws that are located at the top of the back cover.
[* black

[* icon_note
] The screws have locking washers that prevent the screws from falling off of the back cover. Leave these locking washers on the screws,screws; it is not necessary to remove the washers for this repair guide.

在开源创作共享许可协议下,你的投稿已被许可