翻译步骤＃3 - Samsung Gear 2 Home Button Replacement - iFixit

修复你的物品

维修的权力

商店

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Using two spudgers, place the pointed tips at each end of the U-shaped snap ring located under where the home button assembly was.

Remove the snap ring by pushing down with both pointed objects on each side of the ring simultaneously, it should pop off.

Be careful not to lose the snap ring because it can be lost easily.

Using two spudgers, place the pointed tips at each end of the U-shaped snap ring located under where the home button assembly was.
Remove the snap ring by pushing down with both pointed objects on each side of the ring simultaneously, it should pop off.
Be careful not to lose the snap ring because it can be lost easily.
To replace the snap ring, rest it above the home button peg using tweezers so the open side rests on the peg. Then use the flat end of the spudger and push firmly down on the snap ring to snap it back onto the peg as shown in the last picture.

在开源创作共享许可协议下，你的投稿已被许可。