跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 16

步骤 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

用撬棒的平端将耳机插孔连接器从电路板上断开。

只撬开连接器,不在插座上。

新版的 iPad 设备有一圈胶带连接电路板上的插座。必须断开该胶带才能断开耳机插孔。

将耳机插孔电缆翻折起来。

在开源创作共享许可协议下,你的投稿已被许可