跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Only pry up on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Only pry up on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可