跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的28本指南

英语
中文

正翻译步骤 6

步骤 6
Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board. The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.
  • Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.

  • The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.

使用撬棒扁平一段来将支架从逻辑板上撬起。

显示屏的排线就在支架下方,因此请勿将撬棒深入过深,这样可能会损坏排线。

在开源创作共享许可协议下,你的投稿已被许可