跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的28本指南

英语
中文

正翻译步骤 4

步骤 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

取下固定电池排线到逻辑板的2.3 mm Phillips #000 螺丝

为了降低短路的风险,您可以使用电池隔离撬片来断开电池与逻辑板的连接。

将电池隔离撬片插入电池连接部位的下方,并将其放在此位置。

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.
[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can useinsert a battery isolation[product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* black] Slide athe battery isolation pickblocker underneath the battery connector area of the logic board, and leave it in place while you work.

在开源创作共享许可协议下,你的投稿已被许可