跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的26指南

英语
中文

正翻译步骤 5

步骤 5
Remove the front panel assembly. During reassembly, wipe any dust or fingerprints off of the inside of the front panel assembly to ensure a clean display.
  • Remove the front panel assembly.

  • During reassembly, wipe any dust or fingerprints off of the inside of the front panel assembly to ensure a clean display.

  • If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.

  • Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.

  • The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

移除前面板组件

在组装过程中,擦拭前面板组件上任何的灰尘和指纹,确保显示屏干净。

如果您的新屏幕遇到“幽灵”或“幻影”触摸输入问题,可以通过在面板背面的标注区域粘贴一层非常薄的绝缘胶带,例如Kapton (聚酰亚胺)胶带,来解决这个问题。 iFixit面板具有良好的绝缘性,不需要粘贴任何胶带。

若无适当的绝缘措施,数字转换器的这些区域可能会与其他组件接地,导致触摸输入故障。

这些绝缘材料是肉眼不可见的,这与许多iPad上的泡沫防尘条不同。

在开源创作共享许可协议下,你的投稿已被许可