跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
With the computer oriented upright with the back facing towards you, remove the two 3 mm Phillips #0 screws. Use the plastic opening tool to pry upwards on the bottom of the plastic piece covering the screw hole on the right side. Do the same for the left side.
  • With the computer oriented upright with the back facing towards you, remove the two 3 mm Phillips #0 screws.

  • Use the plastic opening tool to pry upwards on the bottom of the plastic piece covering the screw hole on the right side. Do the same for the left side.

  • The plastic piece will pop upwards, and a small gap, as shown, will appear. Ensure that it remains in this condition for the next step.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可