跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 2

步骤 2
Keep your hand pressed firmly on the back panel to prevent it from falling. Flip the laptop over horizontally and open up the lid. Insert the tip of the plastic opening tool into the upper left corner of the panel.
  • Keep your hand pressed firmly on the back panel to prevent it from falling.

  • Flip the laptop over horizontally and open up the lid.

  • Insert the tip of the plastic opening tool into the upper left corner of the panel.

  • Keeping its tip under the top panel, slide the plastic opening tool around the panel until the panel is completely loose. Next gently remove the panel.

  • Remove the four 2mm Phillips #0 screws at the top of the keyboard.

  • Slide the plastic opening tool around the keyboard until the keyboard is completely loose. Gently remove the keyboard.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可