跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 13

步骤 13
Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.
  • Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air.

  • When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可