跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 5

步骤 5
Cut 2 notches on each plastic PCB covers. At the position of bridging wires, and faces each other. So the wires won't lift the PCB covers. These are not quite finished.
  • Cut 2 notches on each plastic PCB covers. At the position of bridging wires, and faces each other. So the wires won't lift the PCB covers.

  • These are not quite finished.

  • These are what I'm talking about.

  • Put both PCB covers back. If you bond batteries too tight, may need to loose a little bit, then tighten again later.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可