跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
There are two screws on the left hand side of the laptop near the IR receiver. remove them using a #00 Philips head screwdriver. Slide the speaker panel towards the left, then carefully flip it over onto the keyboard. Make sure not to pull the speaker panel away from the computer just yet - it is still connected!
  • There are two screws on the left hand side of the laptop near the IR receiver. remove them using a #00 Philips head screwdriver.

  • Slide the speaker panel towards the left, then carefully flip it over onto the keyboard.

  • Make sure not to pull the speaker panel away from the computer just yet - it is still connected!

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可