菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的52指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 25

步骤 25
Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat. On the side of the iPad opposite the volume controls, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along the display cable edge.

  • Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • On the side of the iPad opposite the volume controls, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along the display cable edge.

  • If you encounter a significant amount of resistance, leave the picks in place, reheat, and reapply the iOpener to the problem areas.

请小心操作本步骤。 花点时间来确保粘合剂是热并柔软的，并且您已经使用撬片打开了所有开口。 以及不要害怕停止和重新加热。

在音量控制侧面相反的那一面，你应该确保那一面的每个角都已插入撬片。 旋转撬片然后轻轻提起玻璃面板，沿着显示屏排线边缘清理掉最后的粘合剂。

如果在此步骤遇到很大的阻力难以撬起屏幕请重新加热iOpener 然后将其放置在难以撬起的区域。

在开源创作共享许可协议下，你的投稿已被许可。