跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的52指南

英语
中文

正翻译步骤 20

步骤 20
Slide the lower left pick to the lower left corner to cut the adhesive on that corner. Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. The third image shows the two antennas and the home button cavity in the lower case of the iPad.
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • The third image shows the two antennas and the home button cavity in the lower case of the iPad.

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

滑动左下边的撬片来分离粘合剂。

滑动到左下角时停止滑动。 然后放置在此。

第三张图片展示了在iPad 下方的2个天线和Home键

接下来的步骤将会指导您如何避免伤害这些部件。 只加热和撬动指南所指示的部位。

在开源创作共享许可协议下,你的投稿已被许可