跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
日语

正翻译步骤 12

步骤 12
Thread the rubber/plastic stopper back onto the wires.
  • Thread the rubber/plastic stopper back onto the wires.

  • Do this AFTER you have applied solder to the tips of the wires.

  • To do this, I sprayed a bit of alcohol on the whole thing, and pulled the wires with the pliers. It required a pretty decent amount of force—but don't worry, the cables should hold without a problem. Just make sure you're pulling both at the same time.

  • Note that I've also added a tiny length of shrink-tube on the exposed wire.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可