跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 11

步骤 11
Use a drill bit to mark the second, third, and fourth holes. This time around I just marked and drilled each hole with the speaker in place. Do this at your own risk.
  • Use a drill bit to mark the second, third, and fourth holes.

  • This time around I just marked and drilled each hole with the speaker in place. Do this at your own risk.

  • Alternatively, you can just mark the holes first, take the speaker off once more, drill the pilot holes, and remount the speaker with all four screws. Just make sure to hand-tighten every screw, instead of using a powered driver.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可