跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
The speaker is connected on the back with speaker wire, so do not yank it out of its housing once you remove the screws. Use a #2 Phillips screwdriver to unscrew the three Phillips retaining screws. Gently pull the speaker an inch or two from the door in order to expose the wire and connector on the back of the speaker.
  • The speaker is connected on the back with speaker wire, so do not yank it out of its housing once you remove the screws.

  • Use a #2 Phillips screwdriver to unscrew the three Phillips retaining screws.

  • Gently pull the speaker an inch or two from the door in order to expose the wire and connector on the back of the speaker.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可