跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
  • Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

  • Simply place the screwdriver a few minutes on a magnet to magnetize. It will then much easier to remove the screws and even to put them back.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可