翻译步骤＃1 - iPhone 4 Rear Panel Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的23本指南。

返回指南

英语

中文

下一步

正翻译步骤 1

步骤 1

Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

Power off your iPhone before beginning disassembly.

Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your iPhone before beginning disassembly.
Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws (second image). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.
Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.
Be sure the driver is well seated when removing Pentalobe screws, they are very easy to strip.

在开始之前，将您的iPhone电池放电低于25％。 已充电的锂离子电池如遇意外穿刺，可能会起火和/或爆炸。
在开始拆卸前关闭iPhone的电源。
您的iPhone 4后盖可能有两个＃000十字螺丝或苹果的5点“Pentalobe”螺丝（第二张图）。 检查你有哪些螺丝，并确保你也有正确的螺丝刀，以拆下它们。
拆卸两个3.6毫米或000 pentalobe菲利普斯#螺丝旁边的基座连接器。
拆卸Pentalobe螺丝时，确保驱动器安装牢固，非常容易剥离。

在开源创作共享许可协议下，你的投稿已被许可。

正翻译步骤 1

指南步骤编辑键盘快捷键：