跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Pry off the lens frame using a plastic opening tool. Remove the top three T6 screws of the front panel using a 1.5 mm screwdriver. Remove the three screws on the side of the lens using a Phillips #00 screwdriver.
  • Pry off the lens frame using a plastic opening tool.

  • Remove the top three T6 screws of the front panel using a 1.5 mm screwdriver.

  • Remove the three screws on the side of the lens using a Phillips #00 screwdriver.

  • Remove the front panel by pivoting the right side of the front panel outwards using a pair of tweezers.

  • As shown in the last image, the pivoting point is located above the lens.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可