跳转到主内容
英语
中文

正翻译步骤 13

步骤 13
Remove the 2 retaining screws from the top bezel (located where the keyboard used to be). Detach the touchpad and touch inductive panel cables from the system board (there are no fasteners on these cables, just pull them free from the sockets). Detach the LVDS cable from the system board by gently lifting the tape and pulling to the right to unplug the cable.
  • Remove the 2 retaining screws from the top bezel (located where the keyboard used to be).

  • Detach the touchpad and touch inductive panel cables from the system board (there are no fasteners on these cables, just pull them free from the sockets).

  • Detach the LVDS cable from the system board by gently lifting the tape and pulling to the right to unplug the cable.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可