Skip to main content
英语
中文

正翻译步骤 4

Step 4
Remove the cables circled in red by carefully lifting up on them with a prying tool. Remove the flex cable with the green circle by lifting the black clip to the right with a prying tool. See second picture, the clip lifts up and towards the cable (note the line on the logic board. This is how it needs to go back!) Remove the front facing camera and set aside. There is one screw securing the logic board at the bottom next to the Micro SD slot. (Circled in red in third picture)
  • Remove the cables circled in red by carefully lifting up on them with a prying tool.

  • Remove the flex cable with the green circle by lifting the black clip to the right with a prying tool. See second picture, the clip lifts up and towards the cable (note the line on the logic board. This is how it needs to go back!) Remove the front facing camera and set aside.

  • There is one screw securing the logic board at the bottom next to the Micro SD slot. (Circled in red in third picture)

  • Remove the logic board from the frame (paying careful attention to the flex cables) and set it aside.

  • Now that we have removed the logic board we can safely remove the glass and digitizer.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可