跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Pry up the antenna on the communications board with a plastic opening tool. This is one of two antennas on the communications board. The communications board is secured by T4 Torx screws. Upon removing the screws, the communications board slides out of its socket on the logic board. The connection socket style is similar to a Mini PCI Express card.
  • Pry up the antenna on the communications board with a plastic opening tool. This is one of two antennas on the communications board.

  • The communications board is secured by T4 Torx screws.

  • Upon removing the screws, the communications board slides out of its socket on the logic board. The connection socket style is similar to a Mini PCI Express card.

用塑料撬棒将通讯模块上的天线撬开。这是通信模块上两个天线中的一个。

通讯模块由Torx T4 螺丝固定。

在拆下螺丝后,把通讯模块从逻辑主板上滑出。连接样式类似于迷你PCI Express卡。

在开源创作共享许可协议下,你的投稿已被许可