跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 1

步骤 1
To perform this method of testing, you will need a reliable 12v power source. You could use a spare 12v battery and jumper cables. In this case, a battery "jumper" box was used.
  • To perform this method of testing, you will need a reliable 12v power source. You could use a spare 12v battery and jumper cables. In this case, a battery "jumper" box was used.

  • If you are testing a glow plug that is new from the box, you can begin here.

  • If you are testing a plug that is currently in your engine to see if it is the bad plug, you will need to first remove it; see the glow plug replacement guide for advice on this process.

  • Start the test by gripping the body of the glow plug with the negative cable clamp.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可