跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Remove the two screws above the LCD screen with a Phillips #00 screw driver.  These connect to the white plastic cover in which the speaker is housed located on the reverse side of the logic board.
  • Remove the two screws above the LCD screen with a Phillips #00 screw driver. These connect to the white plastic cover in which the speaker is housed located on the reverse side of the logic board.

  • Make sure the white plastic cover remains in contact with the logic board while removing the screws.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可