跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的45本指南

英语
中文

正翻译步骤 1

步骤 1
Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

使用撬棒尖端来将三条AirPort天线线缆从 AirPort 板上的插座中径直翘起。

[* black] Use the tip of a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
[* icon_caution] The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
[* icon_reminder] To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.
[* black] Use the tip of a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
[* icon_caution] The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
[* icon_reminder] To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

在开源创作共享许可协议下,你的投稿已被许可