跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的45本指南

英语
中文

正翻译步骤 2

步骤 2
Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
  • Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.

  • Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

使用撬棒的尖端来推动相机线缆位于逻辑板插座上的链接头。

确保推动方向与逻辑板相平行,先推动一侧,然后让链接头从插座中“走”出来。

[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.
[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

在开源创作共享许可协议下,你的投稿已被许可