跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 4

步骤 4
Now, lift from the right side the board, and be careful, below is the LCD connector. It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun
  • Now, lift from the right side the board, and be careful, below is the LCD connector.

  • It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun

  • I don´t have any photo of the proccess, so I´m sorry for that. You must heat all the LCD area, and with special attention on the top and bottom areas.

  • Please be careful with the 2 lower buttons, they have this orange flat cable!!

  • As you can see, the LCD is totally destroyed, but it was broken before, so...

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可