Skip to main content
英语
中文

正翻译步骤 5

Step 5
The far right screw hole on the speaker has a contact bracket wrapped around it. Remove it and note the orientation for reassembly. The flat portion of the contact clip should rest against the speaker, as shown.
  • The far right screw hole on the speaker has a contact bracket wrapped around it. Remove it and note the orientation for reassembly.

  • The flat portion of the contact clip should rest against the speaker, as shown.

  • The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.

  • The angled end should face up and line up with the outside edge of the speaker.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可