跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 2

步骤 2
There should be no cables connected to the top of the logic board at this point.
  • There should be no cables connected to the top of the logic board at this point.

  • Remove the following 12 Phillips screws from the logic board:

  • Six 4 mm around the edges of the logic board.

  • Two 5 mm securing the right speaker to the logic board (move the speaker off of the logic board).

  • Three 6 mm with wavy washers in the upper, left corner of the logic board.

  • One 4 mm underneath a black bumper in the back right corner of the logic board.

  • One 4 mm screw may not be present on some logic boards.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可