跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 7

步骤 7
Flip the logic board up toward the volume control buttons to expose the antenna connector. Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.
  • Flip the logic board up toward the volume control buttons to expose the antenna connector.

  • Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可