跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 5

步骤 5
The far right screw hole on the speaker has a contact bracket wrapped around it. This small part may fall off unexpectedly,  so it's best to remove it and note the orientation for reassembly. The flat portion of the contact clip should rest against the speaker, as shown.
  • The far right screw hole on the speaker has a contact bracket wrapped around it. This small part may fall off unexpectedly, so it's best to remove it and note the orientation for reassembly.

  • The flat portion of the contact clip should rest against the speaker, as shown.

  • The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.

  • The angled end should face up and line up with the outside edge of the speaker.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可