跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
德语

正翻译步骤 1

步骤 1
Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.
  • Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Verwende einen Spudger um das Lighting Connector-Kabel aus seiner Halterung auf dem Logic Board zu entfernen.

Das Kabel des Lightning Connectors ist leicht an eine Abdeckung überhalb des Logicboards geklebt. Löse es vorsichtig mit dem flachen Ende eines Spudgers.

在开源创作共享许可协议下,你的投稿已被许可