跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board. Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive. Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.
  • Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board.

  • Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive.

  • Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可