跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use the spudger to firmly pry up the plastic housing holding the vibrate motor and loud speaker. Be careful not to pull the plastic housing out right away. The antenna circuit board is still connected to the main body and the antenna could be damaged if pulled on.
  • Use the spudger to firmly pry up the plastic housing holding the vibrate motor and loud speaker.

  • Be careful not to pull the plastic housing out right away. The antenna circuit board is still connected to the main body and the antenna could be damaged if pulled on.

  • Start on the left and slowly move to the right prying up the adhesive and clips holding the plastic unit down.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可