跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
西班牙语

正翻译步骤 1

步骤 1
The IIsi uses 4 30-Pin SIMMs (Installed in pairs of 2) for a maximum ram capacity of 65MB.  It has 1MB soldered to the logic board as well. Start with this SIMM.  Push these 2 metal tabs outward, then push the ram forward.  It can then be lifted out.  You have to remove the SIMMs in order, starting with the one you just removed.  You can then work your way through all of them. Start with this SIMM.  Push these 2 metal tabs outward, then push the ram forward.  It can then be lifted out.  You have to remove the SIMMs in order, starting with the one you just removed.  You can then work your way through all of them.
  • The IIsi uses 4 30-Pin SIMMs (Installed in pairs of 2) for a maximum ram capacity of 65MB. It has 1MB soldered to the logic board as well.

  • Start with this SIMM. Push these 2 metal tabs outward, then push the ram forward. It can then be lifted out. You have to remove the SIMMs in order, starting with the one you just removed. You can then work your way through all of them.

El Macintosh IIsi usa 4 RAM SIMMs de 30 pines, instaladas en pares de dos para una capacidad máxima de 65 MB (4x16MB +1MB). Tiene además 1MB de RAM soldada a la placa lógica.

Comienza con este SIMM. Empuja estas 2 pestañas de metal hacia afuera, luego empuja la Ram hacia adelante. Entonces se puede levantar. Debes quitar los SIMM en orden, comenzando por el que acabas de quitar. A continuación, puedes continuar con los siguientes.

在开源创作共享许可协议下,你的投稿已被许可