跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Remove the seven screws that are holding in the battery.  They can be seen circled in the picture. When unscrewed, lift the battery.  There will be a cable connected to the battery.  Detach this cable from the board and remove the battery. Attach the replacement battery cable to the board and reassemble.  It can be seen highlighted in picture 2.
  • Remove the seven screws that are holding in the battery. They can be seen circled in the picture.

  • When unscrewed, lift the battery. There will be a cable connected to the battery. Detach this cable from the board and remove the battery.

  • Attach the replacement battery cable to the board and reassemble. It can be seen highlighted in picture 2.

  • *Note: When reinserting the battery it is easier to put in the long end first and then dropping the other side in.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可