菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 7

步骤 7
The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。