跳转到主内容
英语
西班牙语

正翻译步骤 4

步骤 4
Remove the two, 20mm silver screws holding the circuit board in place. Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and a small connector (look at second image for where the small connector is). The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.
  • Remove the two, 20mm silver screws holding the circuit board in place.

  • Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and a small connector (look at second image for where the small connector is).

  • The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可