跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the two 10mm silver screws holding the front panel on with the Phillips #2 screwdriver, located on the top side of the front panel. Take off the front panel by depressing the clips (either with your fingers, screwdriver, or other small object) and pulling it off. There are two clips on the top, one on each side, and three on the bottom.
  • Remove the two 10mm silver screws holding the front panel on with the Phillips #2 screwdriver, located on the top side of the front panel.

  • Take off the front panel by depressing the clips (either with your fingers, screwdriver, or other small object) and pulling it off.

  • There are two clips on the top, one on each side, and three on the bottom.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可