跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
With the clear piece of plastic pushed in, take the transparent white piece out from the top of the controller. Keep the clear plastic piece on the controller, but keep it pushed down to provide room for charger port replacement. Use the Philips #00 Screwdriver to unscrew the two 4.0 mm screws that attach the charging port to the rear cover.
  • With the clear piece of plastic pushed in, take the transparent white piece out from the top of the controller.

  • Keep the clear plastic piece on the controller, but keep it pushed down to provide room for charger port replacement.

  • Use the Philips #00 Screwdriver to unscrew the two 4.0 mm screws that attach the charging port to the rear cover.

将透明的塑料片推入,从控制器的顶部取出透明的白色部分。

将透明的塑料片保持在控制器上按下,为充电器端口更换提供空间。

使用Philips#00螺丝刀拧下将充电端口连接到后盖的两个4.0 mm螺丝。

在开源创作共享许可协议下,你的投稿已被许可