跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head. Pull up on each metal tab located at the rear of the projector. There are 5 tabs. Do not pull up on the metal tabs too hard or too fast because they can break easily.
  • Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.

  • Pull up on each metal tab located at the rear of the projector. There are 5 tabs.

  • Do not pull up on the metal tabs too hard or too fast because they can break easily.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可