跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 3

步骤 3
Unplug the speaker wire from the circuit board by simultaneously squeezing the sides and pulling. Pull on the brown tabs located at the sides of the white plastic ribbon holder and pull the ribbon out. Pull the top cover back.
  • Unplug the speaker wire from the circuit board by simultaneously squeezing the sides and pulling.

  • Pull on the brown tabs located at the sides of the white plastic ribbon holder and pull the ribbon out.

  • Pull the top cover back.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可