跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
Flip the projector over. Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.
  • Flip the projector over.

  • Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.

  • Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.

  • Flip the projector back over.

  • Lift up the main lid cautiously to avoid ripping the electrical ribbons.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可