Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 1

Step 1
Be sure any test leads are out and the multimeter is off before opening the device.
  • Be sure any test leads are out and the multimeter is off before opening the device.

  • Turn the multimeter so it is display side down.

  • Lift up the back stand of the device by putting your thumb in the curved well at the bottom of the device, so you have access to the two covered screws below.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可